---
title: "Choose products to monitor"
description: "Turn monitoring on, pick products, and see what the selection costs."
---

> Documentation Index
> Fetch the complete documentation index at: https://use-protect.com/docs/llms.txt
> Use this file to discover all available pages before exploring further.

# Choose products to monitor

Protect checks the primary image of each monitored product. You control which products those are under **Brand → Settings → Detection**.

## Turn monitoring on

Open **Brand → Settings → Detection** and turn on **Monitor this store for copied product photos**. If Protect lacks the `read_products` permission, the screen shows **Access needed**; approve it and the catalog import starts.

## On the Free plan

Protect checks up to 10 products every 30 days. Products you choose are checked first; if you choose none, Protect rotates through your catalog. You cannot start a scan yourself on this plan.

## On the Protect plan

Only the products you select are checked, once a week.

1. **Open the picker**

   Under **Monitored products**, click **Choose products**.
2. **Select products**

   You can select up to 2,000. A product that is not active, or that has no usable primary image, is shown but cannot be selected.
3. **Review the cost**

   **Review your selection** shows the monthly total before you save.
4. **Save**

   Newly added products are charged when you save, and the next scan covers them.

> **Nothing selected means nothing scanned**
>
> On the Protect plan, a store with no selected products is not searched at all.

## How the product charge works

- Each selected product costs $0.50 once per billing period. Variants do not count.
- A product you keep selected is charged again at the start of each new period.
- Removing a product stops its checks from the next scan. It is not refunded for the current period.
- Adding the same product back within the same period costs nothing more.

For example, 100 selected products cost $99 + (100 × $0.50) = $149 for the period.

## Run a scan now

On the Protect plan, open **Brand → Scans** and start a scan. The same screen lists past scans, **Advisory matches** (weak matches that did not qualify as verified) and **Needs manual check** (candidates Protect could not load). Use **Verify now** on a candidate to try it again.

Source: https://use-protect.com/docs/brand/monitored-products/index.mdx
